Topcon X-63 - Page 32

Calibration
MachineCalibration
24
X‐63/X‐63i/X‐62/X‐33/X‐32InstallationandCalibrationManual P/N:7010‐0697
3. TaptheOrientationbox,andselectthephysicalorientation ofthemountedsensor;tapOK.
Figure25:SelectSensorOrientation
4. Repeatsteps2and3fortheremainingboomsensor(s).
5. TapNextandrepeatsteps2and3forthesticksensor.
6. TapNextandrepeatsteps2and3forthebucketsensor.
Figure26:EnterSensorOrientation
ForTS‐i3sensors,Orientationwillonlybeleftorright.