Topcon X-63 - Compass Setup; Compass Driver Installation and Calibration

Calibration
MachineCalibration
36
X‐63/X‐63i/X‐62/X‐33/X‐32InstallationandCalibrationManual P/N:7010‐0697
3. Movethebucketsothatthebottomofthebucketlaysflatontheground,andtapCalibrate;tap
FinishtogototheExcavatorBucketsscreen(Figure46).
Figure46:CalibrateBucketBase
Ifsettingupmultiplebucketsofanykind,skipto“MultipleBucketCalibration”onpage37