Toptech Systems MultiLoad II SCS User Manual

Chapter 13 – Custom Logic
396
Firmware Version 3/4.31.37
Component Real Time (RT)
Parameter
Description
Clearing Errors
Indicates that operational alarms are being cleared for that particular
component. This process can be initiated remotely or locally.
Clear Batch
Indicates that this particular component batch is being cleared and
archived.
Remote Start Button
Unused
Pump Run
Indicates that a particular Component’s pump has been commanded to run.
Pump Kill
Indicates that a Pump Kill signal has been received for a particular
component.
Pump Status
Indicates that a Pump Status signal has been satisfied for a particular
component.
Open Block Valve
Indicates that a component-level Block Valve has been commanded to
open.
Black Valve Status
Looks to the Block Valve Status FCM input port and indicates the current
component-level Block Valve status.
Close Block Valve
Indicates that a component-level Block Valve has been commanded to
close.
Alarm Out
Indicates that a component-level alarm is active.
Authorized
Indicates when a driver is authorized to use a particular component.
Permissive
Indicates that a component-level permissive is active.
Permissive Out
Indicates that all component-level permissives have been satisfied.

Toptech Systems MultiLoad II SCS Specifications

General

Brand	Toptech Systems
Model	MultiLoad II SCS
Category	Control Unit
Language	English