Tormach 1100MX - Page 6

©Tormach® 2020
Specifications subject to change without notice.
Page 6 Tormach 1100MX Operator's Manual (Version 0720A)
For the most recent version, see tormach.com/support
INSTALLATION
37
4.1 Visual Installation Guide 38
4.2 Before You Begin 39
4.3 Installation Tools and Items 39
4.4 Move the Pallet 39
4.5 Assemble the Machine Stand 39
4.6 Unpack the Machine Crate 41
4.7 Install Core Components 42
4.7.1 Install the Y-Axis 42
4.7.2 Lift and Move the Machine 43
Required Tools 43
Before You Begin 43
Assemble the Lifting Bar Kit 43
Connect the Machine for Lifting 44
Lift the Machine 44
4.7.3 Install the Drip Guard 45
4.7.4 Install the X-Axis Motor Cover 45
4.7.5 Install the Controller 46
Install the Controller Arm 46
Install the Monitor 47
Make Monitor Connections 47
Install the PathPilot Controller 48
Set Up the PathPilot Operator Console 48
4.7.6 Install the Oiler 49
Make Automatic Oiler Connections 50
Make Manual Oiler Connections 50
Set Up the Manual Oiler 50
4.7.7 Verify the Installation 50
Power On the Machine 50
Power Off the Machine 52
Verify Spindle Function 52
Verify Axes Function 52
4.8 Install Accessory Components 53
4.8.1 Set Up the Automatic Oiler 53
Look for Leaks and Clear the Lines 53
Specify the Interval Time 53
Specify the Actuation Time 54
4.8.2 Install the FRLFilter-Regulator-Lubricator 54
Install the FRL 54
Set Up the FRL 55
Make Air Connections 55
TABLE OF CONTENTS