Tormach 1100MX - Page 9

©Tormach® 2020
Specifications subject to change without notice.
Page 9 Tormach 1100MX Operator's Manual (Version 0720A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
4.9.3 Configure the Optional Touch Screen Kit 90
SYSTEM BASICS
91
5.1 System Reference 92
5.1.1 Machine Table 92
5.1.2 Spindle 92
About the Spindle 92
5.1.3 Axes 92
5.2 Basic Controls Reference 92
5.2.1 Machine Controls 92
5.2.2 PathPilot Interface 93
PATHPILOT INTERFACE OVERVIEW
95
6.1 About PathPilot 96
6.2 Notebook Section Reference 96
6.2.1 Main Tab Reference 96
6.2.2 File Tab Reference 96
6.2.3 Settings Tab Reference 97
6.2.4 Offsets Tab Reference 97
6.2.5 Conversational Tab Reference 97
6.2.6 Probe Tab Reference 97
6.2.7 Status Tab Reference 98
6.3 Persistent Controls Section Reference 98
6.3.1 Program Control Area Reference 98
6.3.2 Position Status Area Reference 98
6.3.3 Manual Control Area Reference 99
6.4 Keyboard Shortcuts Reference 99
6.5 Manage PathPilot Versions 99
6.5.1 Download and Install an Update File from the Controller 99
6.5.2 Install an Update File from a USB Drive 100
6.5.3 Install a Previous Version of an Update File 100
PATHPILOT TOOLS AND FEATURES
103
7.1 Create and Load G-Code Files 104
7.1.1 Load G-Code 104
Transfer Files to and From the Controller 104
About System Files 104
Preview G-Code Files 104
Access Recent G-Code Files 105
Close the Current Program 105
7.1.2 Edit G-Code 105