Tormach 1100MX - Page 8

©Tormach® 2020
Specifications subject to change without notice.
Page 8 Tormach 1100MX Operator's Manual (Version 0720A)
For the most recent version, see tormach.com/support
Install the Right Rear Top Panel 72
Install the Right Side Panel 72
Install the Right Side Window Retainers 72
Install the Right Front Panel 72
Install the Left Top Panel 73
Install the Right Top Panel 73
Install the Front Upper Panel 74
Install the Front Lower Panel 74
Install the Rear Splash Shield 74
Assemble the Linear Rails 74
Install the Linear Assemblies 75
Assemble the Front Doors 76
Install the Front Door Assemblies 76
Install the Door Latch 77
Install the Floodlights 77
Install the Side Windows 78
Install the Access Panel 79
Install the Stainless Steel Wear Guard 80
Use the Maintenance Labels 80
About the Maintenance Labels 80
Write the Date on the Maintenance Labels 80
Replace the Windows 80
4.8.9 Set up the Door Lock Switch Kit 80
Install the Door Lock Switch Kit 80
Update PathPilot 82
Download and Install an Update File from the Controller 82
Install an Update File from a USB Drive 83
Enable the Door Lock Switch Kit 83
4.8.10 Install the PathPilot Operator Console 84
Required Tools 84
Prepare the Machine 84
Remove the Right Side Window 84
Remove the Operator Box 84
Install the Mount Arm 84
Mount the Console 86
Assemble the Controller and Keyboard Tray 86
Lift and Secure the Controller Assembly 87
Make Electrical Connections 88
Reassemble the Machine 90
4.9 Set Up the PathPilot Controller 90
4.9.1 Specify the Date and Time 90
4.9.2 Specify the Keyboard Language 90
TABLE OF CONTENTS