Toro Multi Pro 1200 - Page 201

Multi Pro 1200/1250 Page 7 -- 39 Drive Train
27.Disassemble differential carrier (L.H. axle shaft) as-
sembly:
A. Remove O--r ing (item 1) from differential carrier
(item 8).
B. Remove retaining ring (item 2) from carrier.
C. Remove L.H. axle shaft assembly (item 3) from
carrier.
D. Remove retaining ring (item 4) and washer (item
5) from axle shaft.
E. Use a bearing puller to remove bearing (item 6)
from axle shaft.
F. Remove oil seal (item 7) from carrier (item 8).
L.H. AXLE SHAFT
2
3
6
8
1
5
7
4
Figure 56
28.Disassemble R.H. axle shaft assembly:
A. Remove R.H. axle shaft assembly (item 1) from
seal cover (item 7).
B. Remove retaining ring (item 2) and washer (item
3) from axle shaft.
C. Use a bearing puller to remove bearing (item 4)
fromaxle shaft.Locateand removewasher(item6).
D. Remove oil seal (item 5) from seal cover.
R.H. AXLE SHAFT
2
3
6
1
5
4
7
Figure 57
Drive Train