Toro Multi Pro 1200 - Page 212

Multi Pro 1200/1250Page 7 -- 50Drive Train
11.Assemble shift arms:
A. Apply multi--purpose grease on lips of new oil
seals (item 14). Install oil seals into transaxle case.
B. Position keeper plates (item 13) and secure with
cap screws (item 12). Torque cap screws from 11 to
13 ft--lb (15 to 17 N--m).
C. ApplyLoctite #680 (or equivalent)tothreadsand
tapers of shift fork shafts.
D. Install 1st--reverse s hift arm lever (item 9).
E. Install 2nd-- 3rd shift arm lever (item 1).
F. Installflatwashers (item 2) andlocknuts(item 3)
to secure shift arms. Torque shift arm retaining lock
nuts from 18 to 22 ft--lb (24.5 to 29.5 N--m).
Figure 85
Loctite #680
11 to 13 ft--lb
(15to17N--m)
18 to 22 ft--lb
(24.5 to 29.5 N--m)
1. Shift arm (2--3)
2. Flat washer
3. Lock nut
4. Shift arm lever (1--R)
5. Cap screw
6. Lock washer
7. Keeper plate
8. Oil seal
1
3
4
5
6
7
8
2
8
7
6
5
3
2