Page 10 -- 10
Spray Circuit
Power Current
Control Current
Indicator/Gauge Current
Multi Pro 1250
Pump Switch and All Spray Switches ON
Master Boom Switch ON
RELAY (LOWER)
RELAY (RAISE)
RELAY (LOWER)
RELAY (RAISE)
(OPTIONALKIT)
NOTE: WHEN THE PUMP SWITCH IS PRESSED
TO THE MOMENTARYON POSITION, SWITCH
TERMINALS 5AND 6ARE USED TO INITIALLY
ENERGIZE THE PUMPRELAYANDALSO TO CREATE
ALATCHCIRCUIT THROUGH SWITCHTERMINALS
2AND 3. THIS LATCH CIRCUITKEEPS THE PUMP
RELAYENERGIZEDAS SHOWN.
(ENERGIZED)
(ENERGIZED)
NOTE: BOOM VALVES SHOWNAS OPENING AND
USING CURRENT. ONCE BOOM VALVESARE
OPENED, ASWITCH IN THE BOOM VALVE WILL
SHUT OFF THE BOOM VALVE MOTOR.THE LIGHT
IN THE SPRAY SWITCH WILL STAYILLUMINATED
AS LONG AS THE SWITCH IS INTHE ON POSITION.
MASTER BOOM
SWITCH
REGULATING
VALVE
RIGHTBOOM
ACTUATOR
LEFTBOOM
ACTUATOR
APPLICATION
RATE SWITCH
RATE LOCKOUT
SWITCH
AD
SHIELD
BLACK
CLEAR
SHIELD
BLACK
CLEAR
To Next Page
Loading...
