Toshiba B-EX6T Series - Page 64

63
rsv1: (Reserved1): Reserved
rsv2: (Reserved2): Reserved
rsv3: (Reserved3): Reserved
rsv4: (Reserved4): Reserved
rsv5: (Reserved5): Reserved
rsv6: (Reserved6): Reserved
rsv7: (Reserved7): Reserved
rsv8: (Reserved8): Reserved
rsv9: (Reserved9): Reserved
Note: If “CN” is selected for the parameter clear destination, the ENERGY TYPE parameter is not displayed on the
menu and unable to be set in the system mode and user system mode. However, the initial value will be set after a
RAM clear, so it is printed on the maintenance counter/parameter settings print label.
POWER SAVE TIME [ ]
[Description] Length of time until the printer enters sleep mode
[Values to be printed]
1 min. to 240 min.
RIBBON TORQUE [ ]
[Description] Ribbon take-up torque
[Values to be printed]
Normal: Standard
Low: Low
BASIC [ ]
[Description] Basic interpreter setting
[Values to be printed]
OFF: Basic interpreter is disabled.
ON: Basic interpreter is enabled.
BASIC TRACE [ ]
[Description] Basic interpreter trace setting
[Values to be printed]
OFF: Trace is disabled.
ON: Trace is enabled.
<< PANEL >>
LANGUAGE [ ]
[Description] Selection of a language for displaying LCD messages
[Values to be printed]
ENGLISH: English
GERMAN: German
FRANCH: French
DUTCH: Dutch
SPANISH: Spanish
JAPANESE: Japanese
ITALIAN: Italian
PORTUGUESE: Portuguese
Si.CHINESE: Simplified Chinese
KOREAN: Korean
TURKISH: Turkish
POLISH: Polish
MODEL NAME [ ]
[Description] Whether to display the model name
[Values to be printed]