Toshiba B-EX6T Series - Page 63

62
[Values to be printed]
TYPE1: Compatible: Compatible with the current version
TYPE2: Special Spec: Special specification
XML [ ]
[Description] XML data printing
[Values to be printed]
OFF: Disabled.
STD: Standard specification
ORACLE: Specification for Oracle
SAP: Specification for SAP
STD EXTERNAL: Standard specification (External memory is used.)
ORACLE EXTERNAL: Specification for Oracle (External memory is used.)
SAP EXTERNAL: Specification for SAP (External memory is used.)
THRESHOLD SEL(R) [ ]
[Description] Threshold value for the reflective sensor
[Values to be printed]
MANUAL SET: Manually set value is used.
COMMAND SET: Command specified value is used.
THRESHOLD SEL(T) [ ]
[Description] Threshold value for the transmissive sensor
[Values to be printed]
MANUAL SET: Manually set value is used.
COMMAND SET: Command specified value is used.
ENERGY TYPE (T) [ ]
[Description] Energy level applied to the print head in thermal transfer mode
[Values to be printed] B-EX6T1/T3
Generic: General-purpose
rsv1: (Reserved1): Reserved
rsv2: (Reserved2): Reserved
rsv3: (Reserved3): Reserved
rsv4: (Reserved4): Reserved
rsv5: (Reserved5): Reserved
rsv6: (Reserved6): Reserved
rsv7: (Reserved7): Reserved
rsv8: (Reserved8): Reserved
rsv9: (Reserved9): Reserved
[Values to be printed] B-EX4T1
SR1:AG2,AG4,AG6E: Semi-resin1
SR2:RG2,FG2,SG2: Semi-resin2
R1:AS1: Resin1
R2:RS1: Resin2
R3: (Resin3): Resin3
Generic: Generic
rsv1: (Reserved1): Reserved
rsv2: (Reserved2): Reserved
rsv3: (Reserved3): Reserved
rsv4: (Reserved4): Reserved
Note:Can not use “R3: (Resin3)” for B-EX4T1-T
ENERGY TYPE (D) [ ]
[Description] Energy level applied to the print head in thermal direct mode
[Values to be printed]
NORM: Normal: Standard