Toshiba E-STUDIO3508A - 4.1.3 Receiving tray; 4.1.4 Tray rear cover

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 2
4.1.3 Receiving tray
4.1.4 Tray rear cover
(1) Remove the left cover.
 P. 4-1 "4.1.2 Left cover"
(2) Remove the receiving tray [1].
Fig. 4-3
(1) Remove the receiving tray.
 P. 4-2 "4.1.3 Receiving tray"
(2) Remove the left rear cover.
 P. 4-3 "4.1.6 Left rear cover"
(3) Remove the connecting port cover.
 P. 4-3 "4.1.7 Connecting port cover"
(4) Remove 1 screw and take off the tray rear
cover [1] by sliding it to the left.
Fig. 4-4
Notes:
When installing, insert the latch [2] into the
hole in the frame.
Fig. 4-5