e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 26
6.4.5 Setting range correction
The values of the background peak in the range correction can be switched to "varied" or "fixed" in the
following codes. If they are fixed, the range correction is performed with standard values.
The values of the background peak affect the reproduction of the background density.
< 05 Adjustment Mode >
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of P. 6-24 "6.4.2 Density adjustment".
6.4.6 Adjustment of smudged text in black
The smudged/faint text can be set at the following codes.
< 05 Adjustment Mode >
<Procedure>
Procedure is same as that of P. 6-24 "6.4.2 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/
Photo
Text User Custom
7286 7287 7237 Manual density mode 0: Background peak / fixed
1: Background peak /
varied
Original mode
Item to be adjusted Remarks
Text/
Photo
Text
User
custom
7097 7098 7252 Adjustment of smudged
text in black
When a larger value is set, black text becomes
thinner. When a smaller value is set, it becomes
thicker.
Acceptable values: 0 to 4 (Default: 2)
Notes:
Remember the image specifications and life
span of the replacing parts may not meet
the standard when the setting value is
changed from the default value.
To Next Page
Loading...
