Toshiba E-STUDIO3508A - 4.5.11 Transport roller

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 54
4.5.11 Transport roller
(3) Press the rear hinge [4] on the rear side
toward the front side. Remove the feed cover
[1] while turning the feed cover [1] in the
direction of the arrow.
Fig. 4-145
(1) Remove the low speed transport clutch.
 P. 4-78 "4.5.33 Low speed transport
clutch (CLT6)"
(2) Remove the automatic duplexing unit.
 P. 4-149 "4.12.1 Automatic duplexing unit
(ADU)"
(3) Open the feed cover [1].
Fig. 4-146
(4) Remove 4 screws and take off the stay [2].
Fig. 4-147