Toshiba E-STUDIO3508A - 4.9.3 Transfer roller unit; 4.9.4 Transfer roller

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 116
4.9.3 Transfer roller unit
4.9.4 Transfer roller
(1) Open the side cover.
(2) Release the hook on the rear side, and then
remove the transfer roller unit [1].
Fig. 4-317
(1) Remove the transfer roller unit.
 P. 4-116 "4.9.3 Transfer roller unit"
(2) Release 4 latches on the transfer roller unit.
Fig. 4-318