Toshiba E-STUDIO3508A - 4.5.33 Low speed transport clutch (CLT6); 4.5.34 1 st drawer feed clutch (CLT3)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 78
4.5.33 Low speed transport clutch (CLT6)
4.5.34 1st drawer feed clutch (CLT3)
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect 1 connector [1]. Remove 1 clip
and the low speed transport clutch [2].
Notes:
When installing the clutch, attach a rotation
stopper to the clutch cover.
Fig. 4-213
Fig. 4-214
(1) Remove the clutch cover.
 P. 4-76 "4.5.32 High speed transport
clutch (CLT5)"
(2) Remove the 1st drawer feed clutch [1].
Fig. 4-215