Toshiba E-STUDIO3508A - 8.4.22 Blotched image

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 342
8.4.22 Blotched image
Fig.8-25
Defective area Step Check items Prescription
Paper 1 Is the paper type corresponding to its
mode?
Check the paper type and mode.
2 Is the paper too dry? Change the paper.
Transfer roller unit 3 Is the power supplying spring of the
transfer roller installed securely? (Is it
almost detached?)
Check the power supplying spring
and reinstall it.
High-voltage transformer
(Transfer roller unit)
4 Is the output from the high-voltage
transformer normal?
Adjust the output. Replace the
transformer if necessary.
Separation 5 Is the output from the separation
charger too high?
Adjust the output, from the
separation charger.
Feeding direction