3
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
OUTLINE OF THE MACHINE
3 - 29
3.7 CONTROL PANEL
3.7.1 General Description
The control panel consists of button switches and touch-panel to operate the equipment and select
various modes, and LEDs to display the state of the equipment.
When the operator’s attention is required, graphic symbols light or blink with messages explaining the
condition of the equipment in the LCD panel. When paper jams and “Call for service” occur, error codes
are also displayed to notify users of the problem.
A 9-inch capacitive touch panel is used in this equipment, resulting in the improvement of operability.
The [ON/OFF] button is placed on the control panel, and this button is used instead of the main power
switch to turn the power ON/OFF. Press this button for at least 1 second to turn the power of the
equipment ON/OFF.
The digital keys are displayed on the touch panel instead of being located on the control panel. In
addition to this, a digital key pad can be installed optionally for a user who wants to carry out the button
operation by means of the actual keys.
Fig. 3-14
To Next Page
Loading...
