Toshiba E-STUDIO3508A - 4.3.8 Platen sensor (S20, S21)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 26
4.3.8 Platen sensor (S20, S21)
(1) Remove the rear top cover.
 P. 4-6 "4.1.14 Rear top cover"
(2) Remove 5 screws.
Fig. 4-66
Fig. 4-67
(3) Disconnect 2 connectors and take off the
platen sensor assembly [1].
Notes:
When installing, be careful not to connect
each different connector.
Fig. 4-68