Toshiba E-STUDIO3508A - 4.12.11 ADU entrance sensor (S7); 4.12.12 ADU exit sensor (S6); 4.12.13 Transport roller (Upper and lower)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 162
4.12.11 ADU entrance sensor (S7)
4.12.12 ADU exit sensor (S6)
4.12.13 Transport roller (Upper and lower)
(1) Remove the ADU guide assembly.
<35ppm/45ppm/50ppm>
 P. 4-152 "4.12.3 ADU guide assembly
<35ppm/45ppm/50ppm>"
<20ppm/25ppm/30ppm>
 P. 4-154 "4.12.4 ADU guide assembly
<20ppm/25ppm/30ppm>"
(2) Disconnect 1 connector [2] from the ADU
guide assembly [1].
(3) Release the latch and remove the ADU
entrance sensor [3].
Fig. 4-433
(1) Remove the ADU guide assembly.
<35ppm/45ppm/50ppm>
 P. 4-152 "4.12.3 ADU guide assembly
<35ppm/45ppm/50ppm>"
<20ppm/25ppm/30ppm>
 P. 4-154 "4.12.4 ADU guide assembly
<20ppm/25ppm/30ppm>"
(2) Disconnect 1 connector [2] from the ADU
guide assembly [1].
(3) Release the latch and remove the ADU exit
sensor [3].
Fig. 4-434
(1) Remove the ADU guide assembly.
<35ppm/45ppm/50ppm>
 P. 4-152 "4.12.3 ADU guide assembly
<35ppm/45ppm/50ppm>"
<20ppm/25ppm/30ppm>
 P. 4-154 "4.12.4 ADU guide assembly
<20ppm/25ppm/30ppm>"
(2) Bend the rib [2] of the ADU guide assembly
[1] to remove the collar [3].
Fig. 4-435