5
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
5 - 47
5.15 [75 File System Recovery Mode]
5.15.1 Overview
This is a mode to check if there is any damage to the file system (HDD) and recover it if necessary. Use
this mode only in the following cases.
• There is a possibility of damage to the file system (HDD).
• There is an apparent damage to the file system (HDD), requiring recovery or initialization.
This mode enables you to have the following functions.
5.15.2 Operation procedure
(1) Perform [HS-75] by pressing the [75 File System Recovery Mode] icon.
The following screen appears.
Fig.5-32
(2) Press the icon to operate.
Notes:
• Do not turn the power OFF with the [MAIN POWER] button after the processing has started
(while the processing is being performed).
• After the processing is completed, a beep sounds 4 times and either "Completed" or
• "Failed" appears on the screen.
Remarks:
When the mode is started, "1. Check F/S" is selected by default.
Content Functions
Check F/S Checks the file system.
Recovery F/S Recovers the file system.
Initialize HDD Initializes partitions in the HDD.
Initialize DB Initializes database (LDAP DB/log DB/language DB).
SMART Info Displays the various information in the HDD.
DISK Info Displays the usage rate of HDD.
HDD Utility Initializes log files.
File System(F/S) Recovery Mode -> Check F/S
Please Select Mode
>1. Check F/S
2. Recovery F/S
3. Initialize HDD
4. Initialize DB
5. SMART Info
6. DISK Info
7. HDD Utility
To Next Page
Loading...
