Toshiba E-STUDIO3508A - 9.1.3 Hard disk (HDD)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 4
9.1.3 Hard disk (HDD)
(7) Remove 6 screws and take off the SYS
board [7].
Fig. 9-9
(1) Remove the SYS board cover.
 P. 9-1 "9.1.1 SYS Board cover"
(2) Remove 4 screws and disconnect 2
connectors [1], and then take off the HDD
unit [2].
Fig. 9-10
(3) Loosen 4 screws.
Fig. 9-11