e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
7 - 34
7.7.14 Inner Finisher
Item Interval Description Remarks
Transport roller Every 30,000 of paper feeding times Cleaning Wipe with a
cloth soaked in
water and then
tightly
squeezed.
Small roller in the paper
transport section
Transport path and
guides
Transport path sensor Wipe with a dry cloth.
Grease application to
drive unit
As needed Applying
grease
EM-50L
Paper detection sensor Minimum maintenance interval set
for the equipment
Cleaning
Wipe with a dry cloth or alco-
hol
To Next Page
Loading...
