Toshiba E-STUDIO3508A - 9.2.9 Procedures when replacing EEPROM

9
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
REPLACEMENT OF PC BOARDS/HDD
9 - 33
9.2.9 Procedures when replacing EEPROM
A procedure for replacing the EEPROM is shown below.
Fig. 9-32
[A] Replace EEPROM
(1) Confirm that the main power switch is turned OFF.
(2) Replace the EEPROM.
(3) Perform [FS-08-4581] to copy the data in SRAM to EEPROM.
(4) Turn the power OFF.
Start
[A] Replace EEPROM
Settings completed