8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 7
8.2 Error Code List
The following error codes is displayed at the upper right of the screen when the “CLEAR PAPER” or
“CALL SERVICE” symbol is blinking.
8.2.1 Jam
Error code Classification Contents Troubleshooting
E010 Paper exit jam Jam not reaching the exit sensor: The paper which
has passed through the fuser unit does not reach
the exit sensor.
P. 8-70
E020 Stop jam at the exit sensor: The trailing edge of the
paper does not pass the exit sensor after its leading
edge has reached this sensor.
P. 8-70
E030 Other jam Power-ON jam: The paper is remaining on the
paper transport path when power is turned ON.
P. 8-100
E061 Incorrect paper size setting for upper drawer: The
size of paper in the 1st drawer differs from size
setting of the equipment.
P. 8-101
E062 Incorrect paper size setting for lower drawer: The
size of paper in the 2nd drawer differs from size
setting of the equipment.
P. 8-101
E063 Incorrect paper size setting for PFP upper drawer:
The size of paper in the 3rd drawer differs from size
setting of the equipment.
P. 8-101
E064 Incorrect paper size setting for PFP lower drawer:
The size of paper in the 4th drawer differs from size
setting of the equipment.
P. 8-101
E065 Incorrect paper size setting for bypass tray: The
size of paper in the bypass tray differs from size
setting of the equipment.
P. 8-101
E090 HDD abnormality causes jam: Image data to be
printed cannot be prepared.
P. 8-84
E110 Paper misfeeding ADU misfeeding (Paper not reaching the
registration sensor): The paper which has passed
through ADU does not reach the registration sensor
during duplex printing.
P. 8-84
E120 Bypass misfeeding (Paper not reaching the 1st
transport sensor): The paper fed from the bypass
tray does not reach the 1st transport sensor.
P. 8-85
E130 Upper drawer misfeeding (Paper not reaching the
1st transport sensor): The paper fed from the upper
drawer does not reach the 1st transport sensor.
P. 8-86
E140 Lower drawer misfeeding (Paper not reaching the
2nd transport sensor): The paper fed from the lower
drawer does not reach the 2nd transport sensor.
P. 8-87
E150 PFP upper drawer misfeeding (Paper not reaching
the PFP upper drawer feed sensor): The paper fed
from the PFP upper drawer does not reach the PFP
upper drawer feed sensor.
P. 8-88
E160 PFP lower drawer misfeeding (Paper not reaching
the PFP lower drawer feed sensor): The paper fed
from the PFP lower drawer does not reach the PFP
lower drawer feed sensor.
P. 8-89
E190 LCF misfeeding (Paper not reaching the LCF feed
sensor): The paper fed from the LCF does not
reach the LCF feed sensor.
P. 8-91
To Next Page
Loading...
