Toshiba E-STUDIO3508A - 9.1.9 EEPROM <for LGC board>

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 10
9.1.9 EEPROM <for LGC board>
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Remove the EEPROM [2] from the LGC
board [1].
Notes:
• Be careful not to damage the EEPROM
when replacing the EEPROM.
• When installing the EEPROM, pay
attention to the orientation. Install the
EEPROM with its concave portion left.
Fig. 9-26