e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
7 - 24
* m, n. Main charger case/Needle electrode
Clean the main charger case with a cloth soaked in water and squeezed tightly, and then wipe
them with a dry cloth.
Clean the needle electrode only with the main charger cleaner.
Replace the needle electrode with a new one if it is damaged regardless of the number of output
pages which have been mode.
Notes:
Do not touch the needle electrode with your bare hand when attaching the needle electrode.
7.7.5 Developer section
Fig. 7-15
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
a Whole developer unit B
b Developer material R1
80/100/120/125/
150/150
c Front shield B R3 28-32
d Guide roller B 29-17
e Side shield B R3 28-30
28-31
f Developer unit lower stay B
g Oil seal (6 pcs.) AV R1
480/600/720/750/
900/900
28-1
29-8
29-12
To Next Page
Loading...
