8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 279
8.3.23 Printer function error
[4011] Print job cancellation
[4021] Print job power failure
[4030] No printer kit/Invalid
[4031] HDD full error
[4032] Private-print-only error
[4033] Printing data storing limitation error
Classification Error item
Printer function error
Print job cancellation
Check item Measures
Setting • This message appears when deleting the job on the screen.
Classification Error item
Printer function error Print job power failure
Check item Measures
Setting • When there are running jobs, perform the job in error
again after the completion of the running jobs. If the error
still occurs, turn the power OFF and then back ON, and
perform the job again.
Classification Error item
TopAccess related error No printer kit/Invalid
Check item Measures
Setting • Install the print kit and perform the job again.
• Register it officially and perform the job again.
Classification Error item
TopAccess related error HDD full error
Check item Measures
Setting • Delete unnecessary private print jobs and invalid
department print jobs.
Classification Error item
TopAccess related error Private-print-only error
Check item Measures
Setting • Select “Private”, and then perform the printing again.
Classification Error item
TopAccess related error Printing data storing limitation error
Check item Measures
Setting • Select “Normal Print”, and then perform the printing again.
To Next Page
Loading...
