Toshiba E-STUDIO3508A - 8.3 Diagnosis and Prescription for Each Error Code; 8.3.1 Check item

To Next Page

To Previous Page

ERROR CODE AND TROUBLESHOOTING

8 - 69

8.3 Diagnosis and Prescription for Each Error Code

8.3.1 Check item

Check item Contents

Sensor check • Check the sensor in the test mode.

• Check that there is no dust on the sensor.

• Check that the actuator is correctly operated.

Connector check • Check that the connector is not disconnected.

• Check that the pins are not deformed and do not come off.

• Disconnect and reconnect the connector.

Harness check • Check if the harnesses are open circuited.

Motor check • Check the motor in the test mode.

• Check that there is no abnormality in the driving section.

• Check that there is no abnormality in the roller.

Board check • Check if the board is short circuited or open circuited.

Other manuals for Toshiba E-STUDIO3508A