Toshiba E-STUDIO3508A - 4.3.5 Carriage home position sensor (S3)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 22
4.3.5 Carriage home position sensor (S3)
Notes:
When replacing the lens unit, do not touch
the screws (7 places).
Fig. 4-56
Fig. 4-57
(1) Remove the original glass.
 P. 4-18 "4.3.1 Original glass"
(2) Remove the rear top cover.
 P. 4-6 "4.1.14 Rear top cover"
(3) Disconnect 1 connector [1].
(4) Release 3 latches and remove the carriage
home position sensor [2].
Fig. 4-58