Toshiba E-STUDIO3508A - 4.2.4 KEY board;button

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 13
4.2.4 KEY board/button
(1) Remove the control panel unit.
 P. 4-8 "4.2.1 Control panel unit"
(2) Remove the hinge cover.
 P. 4-10 "4.2.2 Hinge cover"
(3) Lower 1 hinge, and then remove the USB
harness/signal harness [1] from 2 hooks.
Fig. 4-35
Fig. 4-36
(4) Remove 6 screws and take off the cover [2].
Fig. 4-37