e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 12
(5) Remove the harness from 2 hooks and
disconnect connector [3] and [4], and then
remove the USB harness/signal harness [1].
Fig. 4-32
Fig. 4-33
Notes:
When disconnecting the connector [4],
release the lock [5] and disconnect it.
Fig. 4-34
To Next Page
Loading...
