Toshiba E-STUDIO3508A - 5.3 Service UI; 5.3.1 Overview; 5.3.2 Operation procedure; 5.3.3 Starting the FS Menu from the normal mode

To Next Page

To Previous Page

SELF-DIAGNOSTIC MODE

5 - 7

5.3 Service UI

5.3.1 Overview

Each mode of the self-diagnostic codes can be used by selecting the keyword of the screen in the

Service UI.

The codes which are used frequently can be selected in the Service UI.

The Service UI can be used in the following modes in the FS Menu.

• 05 ADJUSTMENT MODE

• 08 SETTING MODE

Notes:

Not all codes can be used in the Service UI.

For the codes available with the Service UI, refer to the "Self-diagnostic code list" (separate

document).

5.3.2 Operation procedure

(1) Start the FS Menu. Select the mode of the above Service UI and press [NEXT].

(2) Select the item whose setting is to be changed and press [NEXT] until the code number is

displayed. Press [OK]. The operation of the selected code starts.

5.3.3 Starting the FS Menu from the normal mode

If the [Tool] icon is displayed on the USER FUNCTIONS menu of the normal mode, the FS Menu can

be started.

(1) Turn the power ON.

(2) Enter the user name and password if necessary. *

(3) Press [USER FUNCTIONS].

(4) Press the [Tool] icon on the upper left of the screen for at least 3 seconds.

Fig.5-6

Other manuals for Toshiba E-STUDIO3508A