e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 6
[B] HS Menu
(1) Start HS Menu by pressing the [ON/OFF] button while pushing the [HOME] and [START] buttons
simultaneously.
Fig.5-5
(2) Press the icon to operate.
(3) Follow the instructions displayed on the screen.
[C] HA mode
(1) Start HA mode by pressing the [ON/OFF] button while pushing the [HOME] and [ACCESS]
buttons simultaneously.
(2) Enter the password to start and press [OK].
(3) Follow the instructions displayed on the screen.
[D] When a particular setting condition is applied:
The setting value is given at the end of the description by dividing with ":" (colons).
Example:
[FS-08-8911:3]: "3" is set for FS-08-8911.
To Next Page
Loading...
