e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 32
[N] Initialize settings when FAX Board (GD-1370) is installed
(1) Reinstall the FAX Board (GD-1370).
(2) Performs FS-08-9001 (the destination of FAX).
(3) Turn the power OFF.
(4) Perform the [CUSTOM INITIALIZE] [INIT MEMORY] in the FS- [11 FAX CLEAR MODE].
(5) Perform restart the MFP.
(6) Set the dial type according to these buttons: [USER FUNCTIONS] [ADMIN] [FAX]
[INITIAL SETUP]
[O] Set date and time
Set the date and time according to these buttons.
[USER FUNCTIONS] [ADMIN] [GENERAL] [CLOCK] [DATE/TIME]
To Next Page
Loading...
