4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 35
(5) Disconnect 1 connector [4].
Fig. 4-91
(6) Remove the flat cable [6] from the harness
guide [5].
(7) Remove the flat cable [6] from the laser
optical unit.
Fig. 4-92
(8) Remove 1 screw and take off the laser
optical unit [2].
Fig. 4-93
To Next Page
Loading...
