e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 46
(6) Press the flange [6] inside and remove the
bypass feed roller [4].
Fig. 4-121
(7) Remove the clip [7]. Slide the shaft [8]
toward the front side and remove the shaft
[8]. Remove the collar [9].
Fig. 4-122
(8) Release the harness [10] from the harness
guide.
Fig. 4-123
To Next Page
Loading...
