Toshiba E-STUDIO3508A - Page 180

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 60
(5) Remove the shaft cover [3].
Fig. 4-162
Notes:
When replacing the parts or performing
preventive maintenance, apply 1 rice-sized
grain of white grease (Molykote HP-300) to
the place [4] shown in the figure, and apply
half a rice-sized grain of white grease
(Molykote HP-300) to the 2 places [5] shown
in the figure.
Fig. 4-163
[4]
[5]