e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 122
Notes:
• When installing the fuser unit, be sure to
press it in until the lever goes up. If the
lever goes down, the fuser unit has not
been correctly installed.
• "H" is marked on the fuser unit for 35ppm/
45ppm/50ppm for identification. "L" is
marked on the fuser unit for 20ppm/
25ppm/30ppm.
Fig. 4-328
Fig. 4-329
Fig. 4-330
To Next Page
Loading...
