e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 132
(5) Release the harness [3] from the harness
guide. Remove 1 screw [4], and take off the
lamp holder [5] on the front side.
Fig. 4-357
(6) Disconnect 3 connectors.
Fig. 4-358
(7) Release 2 latches and remove the connector
bracket [6].
Fig. 4-359
To Next Page
Loading...
