4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 169
(11) Disconnect 1 connector.
Fig. 4-454
(12) Remove 2 screws and take off the DSDF
board.
Fig. 4-455
(13) Install the SYS board cover with 2 screws.
Fig. 4-456
(14) Install the rear cover with 6 screws.
Fig. 4-457
To Next Page
Loading...
