e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 66
D718 Information Add/Remove
Large Capacity
Feeder
LCF installation/
removal
--YYY-
D730 Information Add/Remove
Finisher
Finisher
installation/removal
--YYY-
D731 Information Add/Remove
Saddle Finisher
Saddle stitch unit
installation/removal
--YYY-
D732 Information Add/Remove Hole
Punch Unit
Hole punch unit
installation/removal
--YYY-
D750 Information Add/Remove
Automatic
Duplexing Unit
ADU installation/
removal
--YYY-
D751 Information Add/Remove
Relay Unit
Bridge unit
installation/removal
--YYY-
D770 Information Add/Remove
Automatic
Document Feeder
ADF installation/
removal
--YYY-
D7B0 Information Add/Remove Fax
Unit(Line1)
Fax (line1)
installation/removal
--YYY-
D7B1 Information Add/Remove Fax
Unit(Line2)
Fax (line2)
installation/removal
--YYY-
D7E0 Information Add/Remove Coin
Controller
Coin controller
installation/removal
--YYY-
D7E1 Information Add/Remove Key
Copy Counter
Key counter
installation/removal
--YYY-
D800 Information The machine was
shut down
--YYY-
D801 Information Turned on the
power
--YYY-
D802 Information Gone into the
energy save mode
--YYY-
D803 Information Gone into the
sleep mode
--Y-Y-
D804 Information The machine was
rebooted
--YYY-
D805 Information - - Y - Y -
DA01 Information Fax board line 1
malfunction
DA02 Information Fax board line 2
malfunction
Error
code
Classification Message Contents
Error code display media
Troubles
hooting
Panl JL ML Noti Cf Pjl
To Next Page
Loading...
