8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 133
[EAA0] Paper remaining in Saddle Stitch Finisher
MJ-1106/1108
[EAB0] Paper transport jam in Saddle Stitch Finisher
MJ-1106/1108
Classification Error item
Finisher jam
(Saddle stitcher section)
Paper remaining in Saddle Stitch Finisher
Check item Measures
Finisher, saddle stitcher • Check if there is any paper in the finisher, saddle stitcher
or the on the transport path of the equipment. Remove it if
there is.
• Use paper accepted in the specifications.
Paper Do not use the paper shorter than the specification.
Junction box paper detection sensor
(S26)
• Sensor check(S26)
• Connector check(CN8)
• Harness check
Transport path-2 (S27) • Sensor check(S27)
• Connector check(CN20)
• Harness check
Transport path-3 (S28) • Sensor check(S28)
• Connector check(CN20)
• Harness check
Ejecting roller sensor(S29) • Sensor check(S29)
• Connector check(CN20)
• Harness check
Interface PC board (I/F) • Board check
• Connector check(CN1, CN2, CN5, CN7, CN8)
• Harness check
Saddle stitcher controller board • Board check
• Connector check(CN10, CN13, CN20)
• Harness check
Replace parts Remarks
Junction box paper detection sensor
(S26)
Transport path-2 (S27)
Transport path-3 (S28)
Ejecting roller (S29)
Interface PC board (I/F)
Saddle stitcher controller board
Classification Error item
Finisher jam
(Saddle stitcher section)
Paper transport jam in Saddle Stitch Finisher
Check item Measures
Finisher, saddle stitcher • Check if there is any paper in the finisher, saddle stitcher
or the on the transport path of the equipment. Remove it if
there is.
• Use paper accepted in the specifications.
To Next Page
Loading...
