e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 146
[EF16] Saddle Stitch Finisher stacker motor home position detection abnormality
MJ-1106/1108
[EF17] Saddle Stitch Finisher folding blade home position detection abnormality
MJ-1106/1108
Classification Error item
Finisher jam (Saddle section) The stacker motor home position cannot be detected.
Check item Measures
Stacker carrier • Is there any mechanical problem when the stacker carrier
is moved?
Stacker home position sensor (S33) • Sensor check
• Connector check
• Harness check
Stacker motor (M14) • Motor check
• Connector check
• Harness check
Saddle controller board • Connector check (CN4)
• Board check
Replace parts Remarks
Stacker home position sensor (S33)
Stacker motor (M14)
Saddle controller board
Classification Error item
Finisher jam (Saddle section) The folding blade home position cannot be detected.
Check item Measures
Folding blade cam • Is there any mechanical problem when the folding blade
cam is rotated?
Folding blade home position sensor
(S35)
• Sensor check
• Connector check
• Harness check
Folding blade clutch (CLT3) • Clutch check
• Connector check
• Harness check
Saddle controller board • Connector check (CN15)
• Board check
Replace parts Remarks
Folding blade home position sensor
(S35)
Folding blade clutch (CLT3)
Saddle controller board
To Next Page
Loading...
