e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 180
[F350] SLG board abnormality (e-STUDIO206L/256/306/356/456/506)
[F400] SYS/HDD cooling fan abnormality
Replacement part Remark
SRAM on the SYS board
Classification Contents
Circuit related service call SLG board abnormality
Check Item Measure
SLG board Board check
Combination of the firmware
version
• Check the combination of the firmware version of the system
ROM, engine ROM, and scanner ROM.
• Reinstall the scanner ROM firmware.
Replacement part Remark
SLG board
Classification Contents
Circuit related service call SYS/HDD cooling fan abnormality
Check Item Measure
SYS/HDD cooling fan Check if the fan is rotating properly. If not, check if any foreign
object is adhered.
SYS board Check the connector (*1) and relay connector.
*1: CN112: e-STUDIO206L/256/306/356/456/506
CN105: e-STUDIO207L/257/307/357/457/507
Replacement part Remark
SYS board
SYS/HDD cooling fan
To Next Page
Loading...
