8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 285
[4F10] System abnormality
Classification Error item
TopAccess related error Printing was not performed success fully due to other
abnormalities.
Check item Measures
Setting 1. Perform the job in error again. If the error still occurs, turn
the power OFF and then back ON, and perform the job
again.
2. Collect the debug log with USB media.
P. 8-3 "8.1.2 Collection of debug logs with a USB
device"
3. Initialize HDD.
Refer to step 3 and later in [E]Replace / Format HDDin
P. 9-14 "9.2.3 Precautions and procedures when
replacing the HDD/SSD".
To Next Page
Loading...
