e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 44
[ 2 ] Picking up System
Fig. 3-26
When the drawer is inserted into the equipment, the drawer tray is raised by the tray-up motor and
paper can be fed.
When the driving force from the main motor is transmitted to the pickup roller, feed roller and transport
roller through the gears and clutches, the paper is fed and transported.
Paper is picked up by the movement of the feed clutch. When the feed clutch is turned ON, the pickup
roller and feed roller rotate, and the paper is picked up from the drawer.
The paper is separated by the separation roller.
To Next Page
Loading...
