Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
45
EN
4 Select “Select Program” using
[Cursor
U / D], then press [ENTER].
Program List will appear.
5 Select a desired programme using
[Cursor
U / D], then press [ENTER].
Program List Menu will appear.
6 Select “Add to Dubbing List” using
[Cursor
U / D], then press [ENTER].
The selected programme is added to the Dubbing
List.
• If you want to select programmes from the
Playlist, select “Playlist” and press [ENTER] to
call up the Playlist. Then follow the steps 5 and
6. (Be noted that Original List programmes and
the Playlist programmes cannot be entered
together in one Dubbing List.)
• If more than one programme is already in the
Dubbing List, a green line will appear in the
Dubbing List. Move the line to the position you
want to insert the programme using
[Cursor
U / D], then press [ENTER]. The
programme is inserted in the selected position.
7 Repeat the steps 5 to 6 until you
select all programmes to be dubbed.
8 After selecting all the programmes
you want, press [RETURN] to go
back to the Dubbing Top Menu. Or
press [ENTER] to call up the option
window and select “Decide”. Then
press [ENTER] to go back to the
Dubbing Top Menu.
9 Select “Dubbing Start” using
[Cursor
U / D], then press [ENTER].
Confirmation window will appear.
10
Select “Yes” using [Cursor L / P],
then press [ENTER].
Dubbing will start.
• It may take awhile to prepare for the dubbing.
• During High Speed Dubbing, the playback
picture will not appear.
Dubbing List
Program List (Original)
1 Title 1
2 Title 2
3 Title 3
4 Title 4
5 Title 5
6 Title 6
7 Title 7
8 Title 8
DUBBING
Decide
To Next Page
Loading...
Need help?
General
