Transfluid DB 2090 ST - Capacity of the Machine; Control Description

General product description
10
1.2.2 Capacity of the machine
 Round tubing mild steel from 88,9 x 3,0 mm Ø
 Round tubing stainless steel 88,9 x 2,0 mm Ø
 Square tubing mild steel 50 x 50 x 2,5 mm Ø
 Max. moment of resistance 18,5 cm³
 Bending angle up to 180° + 10° spring back
 Bending time 50°: 31,0 Sec. (front feed)
 Speed of front feed 900 mm/Sec
 Speed of rotation 162º/sec
 Repetition tolerance bending +/- 0,1º
 Repetition tolerance length +/- 0,5 mm
 Repetition tolerance rotation +/- 0,3º
1.2.3 Control description
 Fitted with 3-axis control of the bending angle, the rotation axis and the
longitudial movement in the different planes
 The bending axis, the rotationaxis and the length axis are coupled with each
other, it ensues a permanent actual and nominal comparison also the control
checks the tolerance and actuates further operations
 With a touch panel control which offers the possibillity to input the dates and
store 1800 different tubes with 20 positions under drawing no.
 With a RS 232 port for connection to a notebook
 It ensues a permanent actual and nominal comparison on the screen