General safety instructions
Trainee operating personnel may at first only work on the machine under the
supervision of an experienced person. Successful completion of the induction
period should be confirmed in writing.
All control and safety devices must be operated only by persons who have been
suitably instructed.
3.3 Keeping information available
This operating manual must be kept near the machine. It must be ensured that all
persons who have to perform activities on the machine can consult the operating
manual at any time. In addition to the operating manual, job control statements within
the meaning of the Health and Safety at Work Act and the regulation governing the
use of tools and equipment must also be provided.
All labels on the machine which display safety and operating instructions must always
be kept legible. Worn or damaged labels must be replaced immediately.
To Next Page